MCF-C10AM05 26R9587 IBM Lenovo Z60 Laptop CPU Fan and Heatsink

100% Brand New and High Quality MCF-C10AM05 26R9587 IBM Lenovo Z60 Laptop CPU Fan and Heatsink

Specification:
Package Content: 1x CPU Fan
Type: Laptop CPU Fan
Part Numbers: IBM Lenovo MCF-C10AM05 26R9587
Condition: Brand New and original
Warranty: 3 months
Remark: Tested to be 100% working properly.

Product Introduction:

The brand new original IBM Lenovo Z60 Fan that is made from A grade quality parts, is tested throughout the manufacturing process to match the original IBM Lenovo Z60 Fan's performance. For it is made under the international standards and certification(CE, UL Listed, ISO9001/9002), we ensure that our IBM Lenovo Z60 fan will be quite compatible with original equipment and specifications. With 30-days money-back guarantee on all IBM laptop fans.

Fit Laptop Models:

IBM Thinkpad Z60

IBM Laptop CPU Fan 100% Warranty:

* 100% Q.C. of MCF-C10AM05 26R9587 IBM Lenovo Z60 Laptop CPU Fan and Heatsink.
* Uses the highest quality parts.
* 100% Q.C. of EVERY product. Extended run time.
* 30 Days Money Back.
* Excellent Service.
* 100% compatible with original parts.

How to Replace a IBM Lenovo Z60 Fan?

1. Follow your laptop owner's manual and assembly guide carefully as you disassemble the laptop. Touch something metal periodically to remove static charge, and work on a large table with a bright light source.

2. Turn off the laptop and unplug it. Remove the main battery, CD/DVD drive and the hard drive. The hard drive is usually located in a slot on one side of the laptop. Remove the screw that holds the cover in place, then pull out the hard drive sled.

3. Turn the laptop over and remove the screws on the bottom that hold the keyboard in place. Flip the laptop over, open it, then lift the keyboard up and out. Unplug the flexible ribbon cable that connects the keyboard to the motherboard.

4. Remove the screws that hold the keyboard bezel and palm rest in place. Carefully pry loose any plastic snaps on the sides, then lift the bezel and palm rest up and out.

5. Unplug the IBM Lenovo Z60 Fan. Remove the screws that hold the heat sink and fan in place, then remove the entire unit from the laptop. Remove any thermal compound residue from the bottom of the heat sink and the CPU.

6. Apply a thin layer of thermal compound on the CPU, then replace the heat sink and fan. Replace the screws, plug the IBM Lenovo Z60 Fan back in, then reassemble the laptop.

7. Plug the laptop in and turn it on. After you use it for a few minutes, you should hear the new fan running and feel warm air blowing from the vent on the side of the laptop. A IBM Lenovo Z60 Fan does not run continuously, so don't be concerned if the IBM laptop fan shuts off periodically.